Re: adjust P3 markers with KPod

[Bob Novas]

I'd very much like this function too. This would be my primary use case for
the KPod

Bob - W3DK

> On 9/2/2016 10:20 AM, Joe Stone (KF5WBO) wrote:
> > The PigKnob is already capable of controlling the PX3 markers.  You
> > simply need to ask Elecraft to port the #MAA and #MBA remote-control
> > commands to the P3.
> >
> > Joe
> > KF5WBO
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Message
> delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Stone (KF5WBO)]

> I'd very much like this function too. This would be my primary use case
> for the KPod

I agree, Bob.  Controlling marker A (or marker B) and QSY'ing the rig VFO to the marker frequency is a primary use case for any remote control panel.

I want to be clear ... porting the #MAA and #MBA remote-control commands to the P3 will enable control of the P3 markers using the PigKnob.  I can't speak to what's involved in controlling the P3 markers using the K-Pod.

Joe
KF5WBO