I played with the macro tester a bit.
Put this macro into one of the memories: I called it "SPKR+PH"
MN097;UP;MN255;
It selects the SPKR+PH menu entry (that's MN097), then it changes it with UP
(it goes between on and off with each UP or DN) and then MN255 to exit the
menu.
I'll put this into K3 Utility Help.
73 de Dick, K6KR
From: Allen Griffith [mailto:
[hidden email]]
Sent: Monday, March 21, 2011 9:25 PM
To:
[hidden email]
Subject: mic menu selection
Dick , you said,
"I sometimes prefer the front panel headphone jack because I like pulling
the
plug out and having the speaker come on. There are menu ways of doing this,
but I'm old fashioned."
73 de Dick, K6KRk,
I'm interested in knowing the menu selections to keep the headphone plugged
in on the front of the K3 and be able to toggle between the phones and
speaker if I understood your reply to
73,
Griff....N5AG
I know some things about a few things and I know little about a lot of
things!!
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
