Re: mic settings for PR 781

[George Thornton]

I just got my K3 back from the factory after a repair and upgrade and have to re-set up my microphone.

I have the PR 781 microphone.  I was wondering what settings (mic gain, compression, TX equalization) people with this microphone have used for best results
From: [hidden email] [mailto:[hidden email]] On Behalf Of Jim Brown
Sent: Sunday, June 11, 2017 1:44 PM
To: [hidden email]
Subject: Re: [Elecraft] mic

True "noise cancelling" mics sound awful. They work on the principle of
cancelling noise more than an inch or two from the mouth. SUPER noisy
places like aircraft are the ONLY place to use them.

Most hams who have too much background noise either don't work the mic
close enough (it should be an inch or two above and alongside the
mouth), or have processing and/or mic gain turned up way too high.

73, Jim K9YC

On Sun,6/11/2017 1:29 PM, Fred Jensen wrote:

> Just curious ... I inherited a David Clark noise cancelling aviation
> headset/mic from a neighbor who was a US Forest Service pilot. I've
> never tried it, the connector is strange. I'm not even sure I know
> where it is right now. Will it work with my K3 if I can find it and
> get the connector compatible? I know they're expensive.
>
> Maybe it will cancel the powerline noise on 80? [:-))
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
> On 6/11/17 12:55 PM, Joe Subich, W4TV wrote:
>>
>> On 6/11/2017 2:45 PM, kevino z wrote:
>>> Although headsets like my Heil Pro 7 may be more money, am I really
>>> "wasting" money on buying a "fancy brand name" considering the
>>> unit consists of mic and incredible speakers?
>>
>> Yes, at about $250 retail (plus adapter cable), the Pro 7 is more than
>> five times as expensive as the Yamaha CM-500 (electret mic), Koss SB40
>> (dynamic mic) or SB45 (electret mic) headsets. Both the Yamaha and
>> Koss headsets have outstanding 120 Ohm headset drivers with sensitivity
>> rated at 96dB/mW and microphones well tailored for voice work. Heil
>> does not even publish the impedance or sensitivity for their headset
>> drivers!
>>
>> For the price of a Heil Pro 7 one could get a Broadcast headset like
>> the Audio Technica BPHS1 ($199), Sennheiser HMD280 ($249) or Shure
>> BRH440M ($249) - all of which are significantly higher quality than
>> the Pro7 (and field proven).
>>
>> 73,
>>
>> ... Joe, W4TV
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]<mailto:[hidden email]>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]<mailto:[hidden email]>

________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]