You can also hold TUNE, which displays QRP levels at a resolution of
0.1 W.
If you have a KXV3 installed, you can put out -10 to +2 dBm at the
transverter OUT jack. In this case, power is adjusted in .01-mW steps.
TUNE shows power in .01-mW increments as well as in dBm.
73,
Wayne
N6KR
On Sep 6, 2007, at 10:11 PM, Ed Muns wrote:
>> Can anyone tell me how one discerns an output power of (say) 200mw or
>> 1 watt on the RF out display? I presume that at QRP levels,
>> the scales changes. Yes?
>
> There are twelve bars in the power meter. At 12 watts and below, one
> watt
> per bar. Above 12 watts, 10 watts/bar.
---
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
