Re-post: BL2 binocular core dimensions

[Paul Fletcher]

Hi all,

I've just ordered a couple of BL2 kits, one of which is to go into an
enclosure without the PC board. Does anyone know the external dimensions of
the cores so I can size a suitable box?

Thanks in advance,
Paul M1PAF

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Mike B-12]

> I've just ordered a couple of BL2 kits, one of which is to go into an
> enclosure without the PC board. Does anyone know the external dimensions of
> the cores so I can size a suitable box?

I have a BL1.  Its manual doesn't list a part number (or even the cores), so I
don't know if it's the same as the 2 baluns included in the BL2. If it is, it's
about 1.13 inches square, by .56 inches thick.

I saw your post last night, but my BL1 is in a box outside, and I had to wait
for the rain to end to crack it open for measurements.

73,

Mike KW1ND

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Paul Fletcher]

Sorry for the noise but hit reply instead of replying to the list. Thanks to
Mike and Bob for answering my question.

73 Paul.

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Mike B
Sent: 15 September 2007 00:43
To: 'Elecraft'
Subject: Re: [Elecraft] Re-post: BL2 binocular core dimensions

> I've just ordered a couple of BL2 kits, one of which is to go into an
> enclosure without the PC board. Does anyone know the external dimensions
of
> the cores so I can size a suitable box?

I have a BL1.  Its manual doesn't list a part number (or even the cores), so
I
don't know if it's the same as the 2 baluns included in the BL2. If it is,
it's
about 1.13 inches square, by .56 inches thick.

I saw your post last night, but my BL1 is in a box outside, and I had to
wait
for the rain to end to crack it open for measurements.

73,

Mike KW1ND

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com