Elecraft

Re:speaker

Classic

List

Threaded

6 messages Options

Paul Saville-4

Re:speaker

Hello Stewart,

Can you recommend any DSP noise reduction program(s) that
are worth experimenting with?

73 Paul ZL3IN

Stewart G3RXQ wrote:
I changed my mono speaker jack for a stereo one, so that I
could get audio on
both channels into my computer sound card line input when
running a DSP noise
reduction program. Simple to do.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Stewart Baker

Re:speaker

Hi Paul,

My favourite is a German program. I find that this does the job of SSB NR
much better than the KDSP2. It is at
http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=9871.
It takes a little time to get used to as the various control labels are in
German, but after some experimenting I have achieved very good results.

73
Stewart G3RXQ
On Sat, 26 Nov 2005 07:47:53 +1300, Paul Saville wrote:

> Hello Stewart,
>
> Can you recommend any DSP noise reduction program(s) that
> are worth experimenting with?
>
> 73 Paul ZL3IN
>
> Stewart G3RXQ wrote:
> I changed my mono speaker jack for a stereo one, so that I
> could get audio on
> both channels into my computer sound card line input when
> running a DSP noise
> reduction program. Simple to do.
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

PA0NCV

Re: Re:speaker

Stewart,

You can easily change the German to English (or Spanish).
Check the the readme file
73
Nick
PAØNCV

Hi Paul,

My favourite is a German program. I find that this does the job of SSB NR
much better than the KDSP2. It is at
http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=9871.
It takes a little time to get used to as the various control labels are in
German, but after some experimenting I have achieved very good results.

73
Stewart G3RXQ
On Sat, 26 Nov 2005 07:47:53 +1300, Paul Saville wrote:

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Stewart Baker

Re: Re:speaker

Nick,
Must get some new glasses, read the readme file, and completely missed the bit
about the other languages !
Many thanks

73
Stewart G3RXQ
On Sat, 26 Nov 2005 13:14:21 +0100, Nick wrote:

> Stewart,
>
> You can easily change the German to English (or Spanish).
> Check the the readme file
> 73
> Nick
> PAØNCV
>
>
> Hi Paul,
>
> My favourite is a German program. I find that this does the job of SSB NR
> much better than the KDSP2. It is at
> http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=9871.
> It takes a little time to get used to as the various control labels are in
> German, but after some experimenting I have achieved very good results.
>
> 73
> Stewart G3RXQ
> On Sat, 26 Nov 2005 07:47:53 +1300, Paul Saville wrote:
>> Hello Stewart,
>>
>> Can you recommend any DSP noise reduction program(s) that
>> are worth experimenting with?
>>
>> 73 Paul ZL3IN
>>
>> Stewart G3RXQ wrote:
>> I changed my mono speaker jack for a stereo one, so that I
>> could get audio on
>> both channels into my computer sound card line input when
>> running a DSP noise
>> reduction program. Simple to do.
>>
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: [hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

PA0NCV

Re: Re:speaker

----- Original Message -----
From: "Stewart Baker" <[hidden email]>
To: "Nick" <[hidden email]>; <[hidden email]>;
<[hidden email]>
Sent: Saturday, November 26, 2005 2:07 PM
Subject: Re: Re:[Elecraft] speaker

Nick,
Must get some new glasses, read the readme file, and completely missed the
bit
about the other languages !
Many thanks

73
Stewart G3RXQ
On Sat, 26 Nov 2005 13:14:21 +0100, Nick wrote:

PA0NCV

Re: Re:speaker

In reply to this post by Stewart Baker

May be I have a newer version..

Readme says:

- if you want to implement the languagefile, rename *.~lng~ to *.lng

So I deleted file: first.~lng~
and renamed file : engl.~lng to engl.lng

With that the 'Change Option@ window is in English.

Good luck

73
Nick
PAØNCV

Nick,
Must get some new glasses, read the readme file, and completely missed the
bit
about the other languages !
Many thanks

73
Stewart G3RXQ
On Sat, 26 Nov 2005 13:14:21 +0100, Nick wrote: