ReK160RX problem

[Bryan-47]

Hi All

Tryng to do 160 Meter Alignment page 9.  CALL PLL display shows 06917.1 and then Info 232.

Any ideas will be appreciated.

73 Bryan G3AKF
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Bryan,

This is a residual step left over from the old days when CAL PLL was to be
performed on all bands - it is no longer required, CAL PLL is only done with
the K2 set to 40 meters - and as you experienced it will report an error if
you attempt it on 160.

Simply skip that step in the K160RX instructions and all will be well.

73,
Don W3FPR

----- Original Message -----

Tryng to do 160 Meter Alignment page 9.  CALL PLL display shows 06917.1 and
then Info 232.

Any ideas will be appreciated.



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com