Real-world AGC settings needed

[Bill N2BC]

I've added some AGC "Preset" buttons to my K3_EZ application.  Under
program control I essentially have to simulate turning the VFO A knob to
set the values, (HLD, AGC-F and AGC-S have the widest range.

I would like to collect some real-world examples in order to evaluate
the expected performance of the AGC piece of the application.  Worst
case, running HLD / AGC-F / AGC-S all from one extreme to the other,
takes a bit under 10 seconds.

PLS  email me your settings!

73, Bill   N2BC

[hidden email]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wayne burdick]

Bill,

In conjunction with this, I just wanted to remind everyone that the
present beta release (3.03/2.10) has a problem with CONFIG:AGC DCY=NOR.
It has to be set to SOFT right now. But we've fixed this and will have
a new release shortly.

73,
Wayne
N6KR

On Mar 24, 2009, at 4:19 PM, Bill Coleman wrote:

> I've added some AGC "Preset" buttons to my K3_EZ application.  Under
> program control I essentially have to simulate turning the VFO A knob
> to
> set the values, (HLD, AGC-F and AGC-S have the widest range.
>
> I would like to collect some real-world examples in order to evaluate
> the expected performance of the AGC piece of the application.  Worst
> case, running HLD / AGC-F / AGC-S all from one extreme to the other,
> takes a bit under 10 seconds. ...


---

http://www.elecraft.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html