Recalibrating XV144 with phase lock option

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Recalibrating XV144 with phase lock option

DBellW6AQ
Hi: The instruction sheet says to use the CONFIG:REF CAL to find the  
current reference frequency and my CONFIG does not list a REF CAL.  Where  is it
hidden?  
 
73, Dave
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Recalibrating XV144 with phase lock option

Matt Zilmer
First enable TECH MD via MENU to see the full CONFIG menu.

matt W6NIA

On Sat, 23 Apr 2011 18:44:12 -0400 (EDT), you wrote:

>Hi: The instruction sheet says to use the CONFIG:REF CAL to find the  
>current reference frequency and my CONFIG does not list a REF CAL.  Where  is it
>hidden?  
>
>73, Dave
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Recalibrating XV144 with phase lock option

Don Wilhelm-4
In reply to this post by DBellW6AQ
  Dave,

I believe you are mixing the K144XV (internal K3 option) with the
external XV144.
The REF:CAL on;y applies to the internal transverter.  Use the offset
for the external transverters.

73,
Don W3FPR

On 4/23/2011 6:44 PM, [hidden email] wrote:

> Hi: The instruction sheet says to use the CONFIG:REF CAL to find the
> current reference frequency and my CONFIG does not list a REF CAL.  Where  is it
> hidden?
>
> 73, Dave
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Recalibrating XV144 with phase lock option

AC7AC
In reply to this post by DBellW6AQ
CONTENTS DELETED
The author has deleted this message.