Guys,
The solar eclipse is coming and one group is asking for people to record
8 hours of doppler shifts and amplitudes on as many WWV and CHU freqs as
possible.
I have a K3 with subrx. I'm having trouble different frequencies in the
main and subrx.
Here's what I want to do:
1) Put highest band in the main (14.X MHz)
2) Put lowest band in the sub. (7.x MHz)
3) Main antenna is shared.
VFO IND is Yes
LNK OFF
VFO's set in split or not (tried both ways).
Put lowest frequency into main RX and set AGC, bandwidth et al.
hit A->B twice to enter all info into the sub rx.
Now here is the glitch.
No matter how I try to enter the higher frequency into A (punch it from
front panel in or via logging program). The main RX frequency gets
copied to B. Yes VFO linking is off as indicated by no flashing decimal
point.
The only way I've been able to get what I want is to tune VFO A dial to
the desired frequency. A royal pain.
Is there an easier way?
73 de Brian/K3KO
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
