Remote Panadaptor : Question on K3 i-f buffer amps...

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Remote Panadaptor : Question on K3 i-f buffer amps...

Gerry Hull
Hello All,

I have worked with Tom, N1MM ad we now have a running remote spectrum
window running.
It's an AirSpy HF + at the station and a copy of N1MM+ which is forwarding
the XML spectral data.  Using this mode, it only uses about 6 kb/s for
spectrum display and works VFB over a very limited DSL connection.

Right now, I'm using the K3 i-f output.   It's a bit low.   I've seen some
chatter on i-f preamps for the K3, but can't seem to find any.  I need one
that has the decent filter so the LO doesn't clobber it.

Any ideas?

73,

Gerry Hull, W1VE  Hancock, NH USA
Member: ARRL, YCCC, YCCCN, CW Ops
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Remote Panadaptor : Question on K3 i-f buffer amps...

Don Wilhelm
Gerry,

Was your K3 purchased before about 9/1/2009?
If so, it may not have the IF buffer mod installed which increases the
gain at the IF output by about 10dB.

See  IF Output Buffer Gain Modification  in the listing of K3 mods.

73,
Don W3FPR

On 8/1/2018 3:14 PM, Gerry Hull wrote:

> Hello All,
>
> I have worked with Tom, N1MM ad we now have a running remote spectrum
> window running.
> It's an AirSpy HF + at the station and a copy of N1MM+ which is forwarding
> the XML spectral data.  Using this mode, it only uses about 6 kb/s for
> spectrum display and works VFB over a very limited DSL connection.
>
> Right now, I'm using the K3 i-f output.   It's a bit low.   I've seen some
> chatter on i-f preamps for the K3, but can't seem to find any.  I need one
> that has the decent filter so the LO doesn't clobber it.
>
> Any ideas?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]