Can you use a browser to look at the radio RRC at the transmitter site?
Look at the status information before and after connecting and that may
suggest a cure. The radio status will show "OFF" even when you are connected
with the K3/0, at least it does on my setup.
See especially in "radio settings" the "program mode" which should probably
be "14 Elecraft Twin" in your setup.
Also try using the 'disconnect' button on the status page and then
connecting again with the K3/0.
73 John N5CQ
-----Original Message-----
From: Elecraft [mailto:
[hidden email]] On Behalf Of Robert
Fanfant
Sent: Tuesday, April 7, 2015 12:43 PM
To: Elecraft
Subject: [Elecraft] Remote Rig settings
Anyone have any idea what setting on either the remote rig client/server
would prevent a K3/0 from turning on the K3?
If the K3 at the remote site is turned on, then the K3/0 client will connect
just fine. The K3/0 can then turn off the K3 as well, but then is unable to
turn the K3 back on.
Had all this working, but had to tear down the station to take it on an
expedition. Now things no longer work. :-(
-rob N7QT
Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html Message
delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
