Not entirely clear of the remote configuration. Is it possible the IP
address on the remote end has changed? Teamviewer doesn't care about this.
-de John NI0K
Richard Hayman wrote on 4/1/2020 2:38 PM:
> It worked yesterday. Cannot connect today.
> Any additional troubleshooting ideas?
> All testing looks good. I can get into both radio and control units’ web page by putting in the local IP address in my browser.
> Therefore both LAN and WAN connectivity are OK.
> DNS address is OK.
> Connection not made, shows SIP error and two/tone warning sounds. Radio does not turn on.
> All pings are normal.
> I can connect to radio station's PC using TeamViewer from control point.
>
>
>
> 73, Dick, WN3R
>
[hidden email]
> 202-497-2840
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
