Remotely Turn On a KX3
Locked
 
|
Is there a way to remotely turn on a KX3 through software without physically pushing the Band- and ATU Tune buttons? Any help here is appreciated.
Ariel NY4G Sent from my iPad ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Emory
Thanks for the response. I surmised that no one has figured out how to do this from the relative silence in response to my post. I was interested in it from the standpoint of remote control operation. It is not covered in Fred Cady's book nor in the manual. I will let you know if I find something that works Ariel NY4G > From: [hidden email] > To: [hidden email] > Subject: Re: [Elecraft] Remotely Turn On a KX3 > Date: Thu, 27 Jun 2013 08:13:31 -0400 > > Ariel, > I have looked into this before, I could not find a way. > If you do please let me know. > It can be turned off either remotely or via programmed button but I could > not figure out how to turn it on. > Good luck 73 > Emory WM3M > > -----Original Message----- > From: Ariel Jacala > Sent: Wednesday, June 26, 2013 11:10 PM > To: elecraft reflector > Subject: [Elecraft] Remotely Turn On a KX3 > > Is there a way to remotely turn on a KX3 through software without > physically pushing the Band- and ATU Tune buttons? Any help here is > appreciated. > > Ariel NY4G > > Sent from my iPad > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
There is a way to power on the KX3 remotely. It involves holding one
of the ACC1 or ACC2 pins at a logic state for 100 mS or more. Now ... to find my notes on this. On Thu, 27 Jun 2013 08:50:47 -0400, you wrote: >Emory >Thanks for the response. I surmised that no one has figured out how to do this from the relative silence in response to my post. I was interested in it from the standpoint of remote control operation. It is not covered in Fred Cady's book nor in the manual. I will let you know if I find something that works >Ariel NY4G >> From: [hidden email] >> To: [hidden email] >> Subject: Re: [Elecraft] Remotely Turn On a KX3 >> Date: Thu, 27 Jun 2013 08:13:31 -0400 >> >> Ariel, >> I have looked into this before, I could not find a way. >> If you do please let me know. >> It can be turned off either remotely or via programmed button but I could >> not figure out how to turn it on. >> Good luck 73 >> Emory WM3M >> >> -----Original Message----- >> From: Ariel Jacala >> Sent: Wednesday, June 26, 2013 11:10 PM >> To: elecraft reflector >> Subject: [Elecraft] Remotely Turn On a KX3 >> >> Is there a way to remotely turn on a KX3 through software without >> physically pushing the Band- and ATU Tune buttons? Any help here is >> appreciated. >> >> Ariel NY4G >> >> Sent from my iPad >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[hidden email] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
This is the easiest way that is basically plug and play:
http://va2fsq.com/?page_id=93 Tim On Thu, Jun 27, 2013 at 6:35 AM, Matt Zilmer <[hidden email]> wrote: > There is a way to power on the KX3 remotely. It involves holding one > of the ACC1 or ACC2 pins at a logic state for 100 mS or more. Now ... > to find my notes on this. > > On Thu, 27 Jun 2013 08:50:47 -0400, you wrote: > > >Emory > >Thanks for the response. I surmised that no one has figured out how to > do this from the relative silence in response to my post. I was interested > in it from the standpoint of remote control operation. It is not covered > in Fred Cady's book nor in the manual. I will let you know if I find > something that works > >Ariel NY4G > >> From: [hidden email] > >> To: [hidden email] > >> Subject: Re: [Elecraft] Remotely Turn On a KX3 > >> Date: Thu, 27 Jun 2013 08:13:31 -0400 > >> > >> Ariel, > >> I have looked into this before, I could not find a way. > >> If you do please let me know. > >> It can be turned off either remotely or via programmed button but I > could > >> not figure out how to turn it on. > >> Good luck 73 > >> Emory WM3M > >> > >> -----Original Message----- > >> From: Ariel Jacala > >> Sent: Wednesday, June 26, 2013 11:10 PM > >> To: elecraft reflector > >> Subject: [Elecraft] Remotely Turn On a KX3 > >> > >> Is there a way to remotely turn on a KX3 through software without > >> physically pushing the Band- and ATU Tune buttons? Any help here is > >> appreciated. > >> > >> Ariel NY4G > >> > >> Sent from my iPad > >> ______________________________________________________________ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:[hidden email] > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> > > > >______________________________________________________________ > >Elecraft mailing list > >Home: http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/mmfaq.htm > >Post: mailto:[hidden email] > > > >This list hosted by: http://www.qsl.net > >Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- --------------------------------------- Owner, worldwidedx.com AE6LX, Amateur Radio NNN0ITA, Navy MARS NNN0GAF FOUR, Southern CA Director Assistant for Training, Navy MARS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
Administrator
|
The app note mentioned refers to the K3, not the KX3.
Wayne N6KR On Jun 27, 2013, at 9:38 AM, Tim Tucker <[hidden email]> wrote: > This is the easiest way that is basically plug and play: > > http://va2fsq.com/?page_id=93 > > Tim > > > On Thu, Jun 27, 2013 at 6:35 AM, Matt Zilmer <[hidden email]> wrote: > >> There is a way to power on the KX3 remotely. It involves holding one >> of the ACC1 or ACC2 pins at a logic state for 100 mS or more. Now ... >> to find my notes on this. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Gary Surrency states that the logic state needs to be applied to the PTT line and not either of the ACC lines. The relay circuit I think will still work as long as it is applied to the right line.
At this time, you can only do this: Ariel NY4G Sent from my iPad On Jun 27, 2013, at 12:41 PM, "Wayne Burdick" <[hidden email]> wrote: > The app note mentioned refers to the K3, not the KX3. > > Wayne > N6KR > > > On Jun 27, 2013, at 9:38 AM, Tim Tucker <[hidden email]> wrote: > >> This is the easiest way that is basically plug and play: >> >> http://va2fsq.com/?page_id=93 >> >> Tim >> >> >> On Thu, Jun 27, 2013 at 6:35 AM, Matt Zilmer <[hidden email]> wrote: >> >>> There is a way to power on the KX3 remotely. It involves holding one >>> of the ACC1 or ACC2 pins at a logic state for 100 mS or more. Now ... >>> to find my notes on this. > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
On 6/27/2013 1:00 PM, Ariel Jacala wrote:
> Gary Surrency states that the logic state needs to be applied to the PTT line and not either of the ACC lines. The relay circuit I think will still work as long as it is applied to the right line. > At this time, you can only do this: > > > > > > > > Ariel NY4G > Sent from my iPad > > On Jun 27, 2013, at 12:41 PM, "Wayne Burdick" <[hidden email]> wrote: > >> The app note mentioned refers to the K3, not the KX3. >> >> Wayne >> N6KR >> >> >> On Jun 27, 2013, at 9:38 AM, Tim Tucker <[hidden email]> wrote: >> >>> This is the easiest way that is basically plug and play: >>> >>> http://va2fsq.com/?page_id=93 >>> >>> Tim >>> >>> >>> On Thu, Jun 27, 2013 at 6:35 AM, Matt Zilmer <[hidden email]> wrote: >>> >>>> There is a way to power on the KX3 remotely. It involves holding one >>>> of the ACC1 or ACC2 pins at a logic state for 100 mS or more. Now ... >>>> to find my notes on this. >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html power on the unit remotely. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
Administrator
|
In reply to this post by ny4g
Gary is correct; the KX3 can be turned on remotely with application of 8-12 V on the mic jack's PTT line. Very little current is needed.
Wayne On Jun 27, 2013, at 10:00 AM, Ariel Jacala <[hidden email]> wrote: > Gary Surrency states that the logic state needs to be applied to the PTT line and not either of the ACC lines. The relay circuit I think will still work as long as it is applied to the right line. > At this time, you can only do this: > > <image.png> > > <image.png> > > Ariel NY4G > Sent from my iPad > > On Jun 27, 2013, at 12:41 PM, "Wayne Burdick" <[hidden email]> wrote: > >> The app note mentioned refers to the K3, not the KX3. >> >> Wayne >> N6KR >> >> >> On Jun 27, 2013, at 9:38 AM, Tim Tucker <[hidden email]> wrote: >> >>> This is the easiest way that is basically plug and play: >>> >>> http://va2fsq.com/?page_id=93 >>> >>> Tim >>> >>> >>> On Thu, Jun 27, 2013 at 6:35 AM, Matt Zilmer <[hidden email]> wrote: >>> >>>> There is a way to power on the KX3 remotely. It involves holding one >>>> of the ACC1 or ACC2 pins at a logic state for 100 mS or more. Now ... >>>> to find my notes on this. >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |