Dave,
I saw the same thing with the bandpass tuning, but did not
know what I was really looking at. I thought the adjustment to 300 Hz
was rather course and using shift was also course. I have a 500 Hz
filter which did OK. But, it was hard to deal with the width/shift
issue because of the lack of a "fine" mode. That is a brilliant idea
if they can do it. I just lived with it, but the K3 is so good at 500
Hz filter I had very little issues receiving...except for those guys (
and I must have been one too) that would crowd you. I think there
should be a fine mode for both width and shift.
As far as the
amp is concerned...I have an AL82...and I saw nothing like that, but I
do not have the meter you might have. I just noticed a power drop of
200 watt or so when I was using the dual PB feature. I left it off for
most of the contest. I also saw a drop in signal strength when I
turned it on. Other than that, the AL82 is not all the sophisticated
about the spike issue...at least on my metering I could not see
anything. I have my TX delay set at 25 (I think)
Lee - K0WA
In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? |
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
