Resistor

[kd1na]

Ken,

>From everything you read values from 5K Ohms to 10K is listed.

I use 10 K Ohms and it works very well with both an ICOM mike and the Hail headset sold by Elecraft.

73
Dave
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

For the K2, 5k to 6k is a better value.  The 10k is typically used where
the transceiver provides an 8 volt source - but the K2 provides 5 volts,
  so the lower value is better.  The actual value is not critical.

73,
Don W3FPR

David Robertson wrote:
> Ken,
>
>>From everything you read values from 5K Ohms to 10K is listed.
>
> I use 10 K Ohms and it works very well with both an ICOM mike and the Hail headset sold by Elecraft.
>
> 73
> Dave
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com