Resolving SSB

[Ian Maude]

Hi all,
Just been working on a friends K2 tonight after he fitted the SSB
board.  We ran it up on Spectrogram and set the filters.  Seemed quite
spikey on the display though.  Also it would appear that signals cannot
be resolved on 7 and 3.5 Megs.  14 Megs is fine.  Are we looking at a
problem with LSB here?  The sigs seem to sound the same on 3.5 and 7
Megs whether it is on ssb or cw!
I think his K2 is cursed actually :-)

Any ideas gang?

Ian
--
Ian Maude G0VGS Morecambe Lancs UK | [hidden email]
Sysop of GB7MBC, the Morecambe Bay Cluster
Running Linux and DXSpider | K2 #4044
 
Find out about Summits on the Air!  
Visit the SOTA web site at http://www.sota.org.uk

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ron D'Eau Claire-2]

Did you try starting out with the BFO settings suggested in the SSB module
instructions?

It sounds like you might have the BFO on the wrong sideband for the low
bands...

Ron AC7AC

-----Original Message-----

Hi all,
Just been working on a friends K2 tonight after he fitted the SSB board.  We
ran it up on Spectrogram and set the filters.  Seemed quite spikey on the
display though.  Also it would appear that signals cannot be resolved on 7
and 3.5 Megs.  14 Megs is fine.  Are we looking at a problem with LSB here?
The sigs seem to sound the same on 3.5 and 7 Megs whether it is on ssb or
cw! I think his K2 is cursed actually :-)

Any ideas gang?

Ian


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com