Restoring KX2 SWR and power scales

[Jon Matthews]

In SSB mode, the display no longer shows the SWR and power output scales.
It remains "stuck" on the CMP and ALC scales. Tapping KYR-SPT-MIC (as the
manual seems to suggest to change the display) just alternates between MIC
gain and CW speed adjust. I am sure this is simple, but I have gone through
all the controls and the menu and am stumped. Thanks and 73, Jon - KM6CR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

Re:  "In SSB mode, the display no longer shows the SWR and power output scales.  It remains "stuck" on the CMP..."

Jon,

I don't have a KX2, but my KX3 behaves this way when CW in SSB is enabled.  On the KX3, you toggle it on/off in the CW WGHT menu by tapping the 1 key.

I hope that helps.

Mark,
KE6BB


null
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]