Elecraft

Rev. 2.76 issue

Classic

List

Threaded

2 messages Options

Robert Klein-3

Rev. 2.76 issue

Rev. 2.76 issue I just uploaded the Rev. 2.76 to my K3 (S/N 1461). All I get from audio is a hideous burst when powering on and no audio for a couple of minutes. All bars are illuminated all the way across the S-meter; then, they slowly withdraw to where they should be and Rx audio begins. I tried to upload it several times to be sure and I get the same result.

Any ideas are most welcome.

Robert
KI4ZHF
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Ed Muns, W0YK

RE: Rev. 2.76 issue

Rev. 2.76 issue

Just to insure you have the latest versions of all firmware correctly loaded, do a force load of all firmware, including the DSP tables.

Ed - W0YK

From: [hidden email] [mailto:[hidden email]] On Behalf Of Robert Klein
Sent: Thursday, 25 December, 2008 12:48
To: [hidden email]
Subject: [Elecraft] Rev. 2.76 issue

I just uploaded the Rev. 2.76 to my K3 (S/N 1461). All I get from audio is a hideous burst when powering on and no audio for a couple of minutes. All bars are illuminated all the way across the S-meter; then, they slowly withdraw to where they should be and Rx audio begins. I tried to upload it several times to be sure and I get the same result.

Any ideas are most welcome.

Robert
KI4ZHF

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com