Reverse re-work eliminator

[Don Rasmussen]

>> I truly hope you were not serious.

For my own benefit, right? ;-)

The delivery date of April 1 was included as a hard
clue to some who demand to take my posts seriously.

I post a few times a week. Half of the private
responses are "funny, Don" and the rest go something
like "you have insulted my intelligence, me, and my
family". Which is rarely my intent. ;-)

But you never know about intent, one ham actually took
apart a K2, stripped it bare and mounted it onto a
bike frame**. I've been obsessed lately considering
ways to get the K3 mounted into an Altoids tin. Not
going too well so far...

72, Don.
** http://www.qsl.net/n8mx/bike.html

[Elecraft] Reverse re-work eliminator
John Wiener jawod at fuse.net
Sat Sep 8 10:16:47 EDT 2007

That's one of the funniest things I've read for a
while.  You are a true "deconstructionist".



I truly hope you were not serious.

John
AB8O

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Mark Bayern]

> ... I've been obsessed lately considering
> ways to get the K3 mounted into an Altoids tin. Not
> going too well so far...

That sounds like a difficult task! Most folks here are still waiting
to get a K3 and you're already trying to make it smaller.

Wasn't last weeks discussion about making the K3 (or K4, ...)  _larger_??   :)

Mark
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Thom LaCosta]

On Sat, 8 Sep 2007, Don Rasmussen wrote:

> bike frame**. I've been obsessed lately considering
> ways to get the K3 mounted into an Altoids tin. Not
> going too well so far...

Two things come to mind....take the tin to McDonalds and ask
them to super-size it, purchase esf-100 from Elecraft (Elecraft Shrinking
Fluid).

Live on the edge, try both!

Thom,EIEIO
Email, Internet, Electronic Information Officer

www.baltimorehon.com/                    Home of the Baltimore Lexicon
www.tlchost.net/hosting/                 Web Hosting as low as 3.49/month
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com