I have experienced this too. Cleaning the contact with a small strip of paper helps for a while. I'm wondering if the contact closure current may be too low to overcome the slight surface corrosion that develops over time.
When not in use I store the KXPD2 in the mesh pocket of the CS-40 case.
Adjusting the contact spacing narrower allows less travel and seems to make the problem worse, widening it makes it better but doesn't eliminate the problem.
73,
Brian, K0DTJ
> On Feb 11, 2018, at 05:56, Tommy <
[hidden email]> wrote:
>
> Hi folks,
>
> The right paddle seems to work intermittently on my KX2 paddles. I have to hit it several times to get it to work but even then it's random. I tried moving the adjustment for it in a bit but it makes no difference.
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
