Running RTTY
Locked
 
|
I am not sure whether this is a K3 question or N1MM+ question...
Working the CQWW RTTY this weekend, I found that my settings were different on 15m than on 20/40m ----- in that I had to reverse the tones on 15m and they were offset off the center frequency of the P3 where they had been on 20/40m. What do I need to correct? Thanks to all! -- 73 de Ted Edwards, W3TB and GØPWW and thinking about operating CW: "Do today what others won't, so you can do tomorrow what others can't." ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
FSK or AFSK? I personally run FSK and have never had such an issue. I
suspect you may have some settings saved by band that put you in reverse on some bands. Jim Rhodes K0XU On Mon, Sep 30, 2019, 08:10 Ted Edwards W3TB <[hidden email]> wrote: > I am not sure whether this is a K3 question or N1MM+ question... > > Working the CQWW RTTY this weekend, I found that my settings were different > on 15m than on 20/40m ----- in that I had to reverse the tones on 15m and > they were offset off the center frequency of the P3 where they had been on > 20/40m. > > What do I need to correct? > Thanks to all! > > -- > 73 de Ted Edwards, W3TB and GØPWW > > and thinking about operating CW: > "Do today what others won't, > so you can do tomorrow what others can't." > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Ted Edwards W3TB
Low space means fine teletype.
On 9/30/2019 6:09 AM, Ted Edwards W3TB wrote: > I am not sure whether this is a K3 question or N1MM+ question... > > Working the CQWW RTTY this weekend, I found that my settings were different > on 15m than on 20/40m ----- in that I had to reverse the tones on 15m and > they were offset off the center frequency of the P3 where they had been on > 20/40m. > > What do I need to correct? > Thanks to all! > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
For the question, I am doing AFSK.
Somewhere in the K3 menu settings I must surely have a by-Band irregularity. I should also check bands that I didn’t operate like 160/80/10. Thanks everyone. On Mon, Sep 30, 2019 at 12:42 Lynn W. Taylor, WB6UUT < [hidden email]> wrote: > Low space means fine teletype. > > On 9/30/2019 6:09 AM, Ted Edwards W3TB wrote: > > I am not sure whether this is a K3 question or N1MM+ question... > > > > Working the CQWW RTTY this weekend, I found that my settings were > different > > on 15m than on 20/40m ----- in that I had to reverse the tones on 15m and > > they were offset off the center frequency of the P3 where they had been > on > > 20/40m. > > > > What do I need to correct? > > Thanks to all! > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > 73 de Ted Edwards, W3TB and GØPWW and thinking about operating CW: "Do today what others won't, so you can do tomorrow what others can't." ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
On 2019-09-30 2:32 PM, Ted Edwards W3TB wrote:
> For the question, I am doing AFSK. Normal/REV are per band settings. Switch to data mode (AFSK A) and confirm that REV is not shown on *any* band. 73, ... Joe, W4TV On 2019-09-30 2:32 PM, Ted Edwards W3TB wrote: > For the question, I am doing AFSK. > Somewhere in the K3 menu settings I must surely have a by-Band > irregularity. I should also check bands that I didn’t operate like > 160/80/10. > > Thanks everyone. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |