S Meter Lite Problem
Locked
 
|
I have been trying to run Greg Ordy's S Meter Lite 2.23 on my K3 and can't get it to run.
When I hit the "run" button the transmitter is keyed for a few seconds and then I get a message "Radio not connected or turned on. Perhaps some portion of the configuration is incorrect. Error-Read File count check failed." I have tried different baud speeds, DTR and RTS combinations of on/off, etc. and I believe every combination of options that are available when setting the configuration. All to no avail. I have tried it with Windows 7, Windows XP and even an old Windows 2000 computers. The same results with all. The K3 has the latest firmware installed (MCU 5.62). Other programs such as the K3 Utility, K3-EZ and logging programs connect without a problem. (They are not connected when I try to run S Meter Lite). Does anyone have any ideas as to how to get theis program to run? Steve MollmanKD9HL ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Hi Steve,
I can confirm it works on a K3. I'll shoot you my phone via private email. 73s and thanks, Dave (NK7Z/NNR0DC) https://www.nk7z.net ARRL Technical Specialist ARRL Official Observer Coordinator, for Oregon On 07/20/2018 09:23 AM, Steve Mollman via Elecraft wrote: > I have been trying to run Greg Ordy's S Meter Lite 2.23 on my K3 and can't get it to run. > > When I hit the "run" button the transmitter is keyed for a few seconds and then I get a message "Radio not connected or turned on. Perhaps some portion of the configuration is incorrect. Error-Read File count check failed." > I have tried different baud speeds, DTR and RTS combinations of on/off, etc. and I believe every combination of options that are available when setting the configuration. All to no avail. I have tried it with Windows 7, Windows XP and even an old Windows 2000 computers. The same results with all. > > The K3 has the latest firmware installed (MCU 5.62). Other programs such as the K3 Utility, K3-EZ and logging programs connect without a problem. (They are not connected when I try to run S Meter Lite). > Does anyone have any ideas as to how to get theis program to run? > Steve MollmanKD9HL > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Hi Steve
I have S Meter Lite running on my K3S (w/P3 & KTA1500) connected to a fairly new HP desktop running windows 10 and utilizing the standard USB connection. If it helps any I have the P3 connected to the compute through the K3S. The KPA 1500 is on a separate USB cable directly to the computer I wish I could be of more help, but in my case it downloaded, installed and ran right off the bat. If I can check anything or try anything specific for you let me know. Ron Genovesi [hidden email] > On Jul 20, 2018, at 10:05 AM, Dave Cole (NK7Z) <[hidden email]> wrote: > > Hi Steve, > I can confirm it works on a K3. I'll shoot you my phone via private email. > > 73s and thanks, > Dave (NK7Z/NNR0DC) > https://www.nk7z.net <https://www.nk7z.net/> > ARRL Technical Specialist > ARRL Official Observer Coordinator, for Oregon > > On 07/20/2018 09:23 AM, Steve Mollman via Elecraft wrote: >> I have been trying to run Greg Ordy's S Meter Lite 2.23 on my K3 and can't get it to run. >> When I hit the "run" button the transmitter is keyed for a few seconds and then I get a message "Radio not connected or turned on. Perhaps some portion of the configuration is incorrect. Error-Read File count check failed." >> I have tried different baud speeds, DTR and RTS combinations of on/off, etc. and I believe every combination of options that are available when setting the configuration. All to no avail. I have tried it with Windows 7, Windows XP and even an old Windows 2000 computers. The same results with all. >> The K3 has the latest firmware installed (MCU 5.62). Other programs such as the K3 Utility, K3-EZ and logging programs connect without a problem. (They are not connected when I try to run S Meter Lite). >> Does anyone have any ideas as to how to get theis program to run? >> Steve MollmanKD9HL >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] <mailto:[hidden email]> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft> > Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> > Post: mailto:[hidden email] <mailto:[hidden email]> > > This list hosted by: http://www.qsl.net <http://www.qsl.net/> > Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> > Message delivered to [hidden email] <mailto:[hidden email]> Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: S Meter Lite Problem
|
|
In reply to this post by Elecraft mailing list
Problem solved. Thank you to NK7Z-Dave Cole, who walked me through the correct configuration and as a bonus offered tips on the program's features. All is well!
Steve Mollman-KD9HL ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
You are most welcome!
73s and thanks, Dave (NK7Z/NNR0DC) https://www.nk7z.net ARRL Technical Specialist ARRL Official Observer Coordinator, for Oregon On 07/21/2018 07:11 AM, Steve Mollman via Elecraft wrote: > Problem solved. Thank you to NK7Z-Dave Cole, who walked me through the correct configuration and as a bonus offered tips on the program's features. All is well! > > Steve Mollman-KD9HL ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |