S-meter Lite with LP-Bridge or VSPE

[NZ0T]

Has anyone had any luck getting S-Meter Lite to work with LP-Bridge 0r VSPE?  I like to keep my logging program active and would love to run S-Meter Lite at the same time.

73 Bill NZ0T

[Gregg W6IZT]

It is difficult at best to get multiple applications to share a serial port.
In your case it is likely that both apps are sending queries to the radio
causing collisions to occur. This can result in the apps locking up or in
some cases the serial port on the K3 locking up.

I use DXLab for logging and SpectraVue with an SDR-IQ for a panadapter. They
share the same serial port and play well together because I can configure
DXLabs to not send queries to the radio. DXlabs will read the data returned
from the radio from the SpectraVue queries.

Gregg
W6IZT

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of NZ0T
Sent: Tuesday, September 27, 2011 6:42 PM
To: [hidden email]
Subject: [Elecraft] S-meter Lite with LP-Bridge or VSPE

Has anyone had any luck getting S-Meter Lite to work with LP-Bridge 0r VSPE?

I like to keep my logging program active and would love to run S-Meter Lite
at the same time.

73 Bill NZ0T

--
View this message in context:
http://elecraft.365791.n2.nabble.com/S-meter-Lite-with-LP-Bridge-or-VSPE-tp6
838124p6838124.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ab2tc]

Hi,

There is no reason why this should not work with LP-Bridge. Open a spare virtual port in LP-Bridge if there is not already one and set that as the serial port in S-meter Lite. I have done this in the past with a cute little S-meter program (can't remember if it was S-meter Lite or not).

AB2TC - Knut

NZ0T wrote

Has anyone had any luck getting S-Meter Lite to work with LP-Bridge 0r VSPE?  I like to keep my logging program active and would love to run S-Meter Lite at the same time.

73 Bill NZ0T