SDR-Radio v.1.0

[Richard Meilstrup]

SDR-Radio is the new program from HB9DRV (of HamRadioDeluxe fame) intended
for converting signals from an SDR-IQ radio (hardware) to be processed in
the soundcard of your PC.   I have been playing with SDR-Radio and did not
manage to open Simon's own SDR-IQ via the Internet, but to some extent was
able to watch the rather impressive display on my PC-screen and hear the
signals (with a small delay) using the line-out on the back of my K3. Now I
wonder what would happen if I connect the PC-soundcard to the *IF-out port
of the K3 *using a stereo cable. *
 *Anyone tried this*?*
 Rick, OZ5RM

*
*
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bruce Beford-2]

The IF-Out port on the K3 is an RF-range centered at the 1st IF freq of
8.215 MHz. You cannot connect this directly to a PC soundcard and expect it
to work. Somehting like a SoftRock, SDR-IQ, or LP-Pan is needed to
downconvert the IF freq to the audio range.
-Bruce N1RX


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html