SLUSB and K3
Locked
 
|
Sorry, I failed to mention that I am familiar with setting up the
SLUSB. I used it with my FT-857. That was my oversight for not mentioning it. I'm just trying to get it working with the K3. I'm just missing something. The E-MU 0204 is working FB right now with the K3 so I know the audio I/O works on the back with a soundcard. It's just going to take me getting the right combination. However, the 0204 is going to be my panadapter input so I will need to figure out the SLUSB. I appreciate all the helpful suggestions. Again, my apologies for cross-posting. 73, Joel - W4JBB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Hey Joel,
Since you have used the SLUSB with the Yaesu, have you cross-referenced the jumpers across the jumper block inside the SLUSB with the K3 cable to make sure that the jumpers are putting the signals out on the right pins for said K3 cable? I have never used a Yaesu cable or a commercial K3 cable with the SLUSB (I made my own cable using a cat-5 ethernet cable), so this may be a moot suggestion, but then on the other hand, it would not be the first time that cables from the same manufacturer required a different pin out... 73 & Aloha, Dave, AH6TD On Nov 19, 2011, at 8:54 AM, Joel Black wrote: > Sorry, I failed to mention that I am familiar with setting up the > SLUSB. I used it with my FT-857. That was my oversight for not > mentioning it. I'm just trying to get it working with the K3. I'm just > missing something. > > The E-MU 0204 is working FB right now with the K3 so I know the audio > I/O works on the back with a soundcard. It's just going to take me > getting the right combination. However, the 0204 is going to be my > panadapter input so I will need to figure out the SLUSB. > > I appreciate all the helpful suggestions. > > Again, my apologies for cross-posting. > > 73, > Joel - W4JBB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Another thing to check is the internal SLUSB audio level settings for RX and TX. I had to set the pin for boosting the RX audio level to get it working between my K3 and my iMac. I use Cocoa Modem on the iMac. Other then standard settings you need to do for K3, this was the only "experiment" I had to do before I got it to work. This is documented in the SLUSB user manual under the section "Special Jumpers".
73, phil, K7PEH On Nov 19, 2011, at 11:04 AM, David Herring wrote: > Hey Joel, > > Since you have used the SLUSB with the Yaesu, have you cross-referenced the jumpers across the jumper block inside the SLUSB with the K3 cable to make sure that the jumpers are putting the signals out on the right pins for said K3 cable? > > I have never used a Yaesu cable or a commercial K3 cable with the SLUSB (I made my own cable using a cat-5 ethernet cable), so this may be a moot suggestion, but then on the other hand, it would not be the first time that cables from the same manufacturer required a different pin out... > > 73 & Aloha, > Dave, AH6TD > > > On Nov 19, 2011, at 8:54 AM, Joel Black wrote: > >> Sorry, I failed to mention that I am familiar with setting up the >> SLUSB. I used it with my FT-857. That was my oversight for not >> mentioning it. I'm just trying to get it working with the K3. I'm just >> missing something. >> >> The E-MU 0204 is working FB right now with the K3 so I know the audio >> I/O works on the back with a soundcard. It's just going to take me >> getting the right combination. However, the 0204 is going to be my >> panadapter input so I will need to figure out the SLUSB. >> >> I appreciate all the helpful suggestions. >> >> Again, my apologies for cross-posting. >> >> 73, >> Joel - W4JBB >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to [K3]
|
1 view|%1 views
| Free forum by Nabble | Edit this page |