My SP3 A/B switch has an issue. I use the supplied speaker cable from my K3S
to the speaker A jack. I listen with the switch in the A position, but
frequently push it in to the B position as a convenient mute. Switching back
to A to listen, the sound is somewhat muted scratchy; cutting in and out as
I wiggled the switch. I push the switch in and out a few times, and it
returns to normal. I've switched the cable to the B port, but it's the same
issue.
I removed the side panel, thinking I could shoot a bit of DeoxIT into the
switch, but it appears that the switch is sealed, so I canned that idea.
Any suggestions on an easy fix or should I order up a new switch from
Elecraft and replace it?
Thanks in advance
Ferris Jennings NB6T -
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]