SPE Expert 1K-FA Amplifer and K2 and K3

[G4BUE]

Is anybody using the SPE Expert 1K-FA amplifer with the K2 or K3,
please?

I was wondering which CAT option the amplifier needs to be selected  
to enable it to receive band information from the K2 and K3?

Also, I would appreciate any advice on using the amplifier with the
K2 and K3 in the light of other's experience.

Thanks and 73 de Chris, N4CJ (G4BUE)

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Stewart Baker]

Hi Chris,
I am using my SPE amplifier with both my K2 and K3 and it works
very well. I have put an entry in the Wiki K3 which describes the
band information interfacing. So far I have only used the K3 with
this.

The only thing you have to watch is the input power to the
amplifier. I have my TUNE set at 5W and that is sufficient to get
a good SWR reading on the SPE meter. I use about 10-12W for max UK
legal out.

73
Stewart G3RXQ
On Sat, 19 Apr 2008 14:31:13 -0000, Chris Page wrote:
> Is anybody using the SPE Expert 1K-FA amplifer with the K2 or
K3,
> please?
>
> I was wondering which CAT option the amplifier needs to be
selected
> to enable it to receive band information from the K2 and K3?
>
> Also, I would appreciate any advice on using the amplifier with
the

> K2 and K3 in the light of other's experience.
>
> Thanks and 73 de Chris, N4CJ (G4BUE)
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com