The good folks at Elecraft provided me with a solution to my earlier posted
problem.
Using the original macro for split: SWT13;SWT13;FT1;UPB4;RT0;XT0;SB1;BW$0080
Works fine if you only intend to use it on cw. But if you go to ssb, it has
two problems:
a) it doesn't switch modes and
b) it sets the vfo B bandwith to 800 hz which isn't so good for ssb
Here's the fix .
a) change the macro to add the word delay (no quotes) in between the
two SWT13 statements
b) remove the BW$0080 statement
the new macro looks like this:
SWT13;delay;SWT13;FT1;UPB4;RT0;XT0;SB1
The mode now switches properly. You will have to manually set the bandwidth
you want for vfo b in ssb and cw, but the good thing is the K3 remembers it.
Pete, W1RM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
