-SSB net and KX3&KXPA&BL2

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

-SSB net and KX3&KXPA&BL2

Dwight Anderson
Just a quick note today I had an extremely difficult time getting heard
on the Elecraft SSB net on 20 meters with my vertical this morning.

I decided to pull down the vertical.  I decided to tape my Elecraft BL2
Balun to the Jackite pole and try a dipole.
The BL2 and wire inverted V dipole were up about 35 feet.  (10 foot
elevated porch and 25 feet Jackite pole)

My thought was the KX3 and KXPA tuner would deal with any tuning.  
Seemed like all bands tuned just fine.
My thoughts were, will it radiate and to what extent.

Then on 17M and I was hearing JA7WND calling CQ,  SSB.      I answered
and he heard me and gave me a 5x7 and then 5x8, with a "nice audio!."
That surprised me as 20M was very difficult and you'd think 17M would be
worse.

But that was not the biggest surprise.

Later in the evening I heard UA3ZDC calling CQ, SSB on 20 meters.   I
responded and again he answered.
Again he gave me a good signal.   That was like over 5,500 miles from my
QTH!!!  He must have an incredible antenna and shack to hear me.

I'm very impressed with the Elecraft equipment!  All of it, even the
balun kit.

Well I did not make the Elecraft SSB net this time, but it was sure cool
to make some DX contacts by not giving up and trying something
different.

Much Regards
Dwight
WM5F


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: -SSB net and KX3&KXPA&BL2

Bill Frantz
I tried getting in from New Hampshire running my KX3 flat out
(15W), but no joy. John, N6JW did manage to copy the first 3
characters of my call, but couldn't get the rest. I could hear
Eric and a few others, but apparently nobody could hear me.
Running power seemed to help a lot.

I was using a 2 element wire beam at about 15 feet. It is
resonate on 20M, so the tuner isn't really needed.

73 Bill AE6JV

On 8/15/16 at 9:41 PM, [hidden email] (dwight) wrote:

>Just a quick note today I had an extremely difficult time
>getting heard on the Elecraft SSB net on 20 meters with my
>vertical this morning.

-----------------------------------------------------------------------
Bill Frantz        | gets() remains as a monument | Periwinkle
(408)356-8506      | to C's continuing support of | 16345
Englewood Ave
www.pwpconsult.com | buffer overruns.             | Los Gatos,
CA 95032

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]