SVGA NB doesn't always start latest beta f/ware

[Stephen G4SJP]

Using the just-released beta firmware I am finding that on switch on,
although the P3's NB is engaged the SVGA screen still shows pulses (in this
case from an electric fence).  Turning the NB off and then on via the P3's
menu restores functionality.  This is the case on every band I have tried.
No big deal, but sounds like a little bug to me.


73 Stephen G4SJP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim Brown-10]

On Fri,1/30/2015 9:43 AM, Stephen Prior wrote:
> Turning the NB off and then on via the P3's menu restores functionality.  This is the case on every band I have tried.

There are two menu functions associated with the P3 NB. One is the
switch, the other is NB Level (or whatever it is called). If you're
going to use the P3 NB, you need both on soft keys. First turn the NB
on, then select NB Level and tweak it for best noise removal.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Stephen G4SJP]

Hi Jim,

I can't have explained myself very well.  The NB is working (level 10) on
the P3 but on the VGA output the NB <on> state is not remembered on switch
off.  So if I turn the P3 off and then on again,  the NB works fine on the
P3's own display,  but to make it work on the external monitor I have to
turn the NB off then on again.  Reference to NB here is solely the P3.

Hope that makes sense.  I have been using the NB on the P3's screen for
some time now, but it is only the latest beta I think that extends this
functionality to the P3's VGA output, and that is the version I'm running.

73 Stephen G4SJP

On 30 January 2015 at 17:54, Jim Brown <[hidden email]> wrote:

> On Fri,1/30/2015 9:43 AM, Stephen Prior wrote:
>
>> Turning the NB off and then on via the P3's menu restores functionality.
>> This is the case on every band I have tried.
>>
>
> There are two menu functions associated with the P3 NB. One is the switch,
> the other is NB Level (or whatever it is called). If you're going to use
> the P3 NB, you need both on soft keys. First turn the NB on, then select NB
> Level and tweak it for best noise removal.
>
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]