I am noticing that my SWR meter flickers a bit during SSB
transmissions. I have no indication of RF getting into my signal. I
have checked with several folks and they say may audio is great and no
indication of RF on the audio. I have RF Detect turned on an I never
get an error from that on the radio.
Is this just a typical behavior of the meter?
BTW the antenna is a 40m vertical that is about 150' from the radio and
I have Feedline current chokes on both ends of the coax. The SWR at
the base of the antenna is 1.5:1 or better on the entire band.
Rich
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
