I've added new sample schematics and block diagrams showing how my new
Serial Box (S-BOX) could be used effectively with the Elecraft KX3 and
KPA500 to provide automatic band changes, with no custom cables required.
It also illustrates how the S-BOX supports logger-generated CW keying over
the DTR pin of the same serial port that is controlling the KX3 (something
built-in to the K3 serial port, but not the KX3 or KX2).
https://bit.ly/S-BOXScroll down a bit and click on S-BOX Features and Wiring Examples
<
https://www.kkn.net/~n6tv/S-BOX/Features.html>
then click *KX3 Docking Station*.
For those using RemoteHams software <
https://www.remotehams.com/> with the
K3 or K3S, there's a new diagram showing how one of my customers plans to
use his new S-BOX to remotely power up and use his K3 with the RCForb
client/server software (no RemoteRig box required). It's a complex setup
with a P3, FSK keying, a KPA1500 and a Hamation ShackMaster SM-8 antenna
controller all working cooperatively through the S-BOX, while being
controlled remotely.
I've also added new examples showing how to connect the K3/K3S (or any
supported radio) to an ACOM or SPE amplifier with automatic band changes.
I plan to add one more showing how to connect any supported non-Elecraft
radio to a KPA1500 through the S-BOX.
If you have a particular configuration where it is not obvious from the
current examples and schematics how you would connect things, please send
me your requirements (off line), and I'll see what I can come up with.
I've also simplified the S-BOX order form
<
https://goo.gl/forms/xwyUO4b3QZI8NSzI2> a bit.
73,
Bob, N6TV
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
