Serial cdable (USB) won't connect with K3 directly...

[Nr4c]

I was getting together items to take out for an event on Saturday and spent
hours trying to sort out what was happening with my USB cables.  My K3 would
not see the serial port.  As a last resort, I plugged the cable into the P3
and everything worked!  Why does it work through the P3, but not direct?

 

.bill  nr4c  (confused)

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Alan Bloom]

Perhaps the P3 and K3 are set to different baud rates?

Alan N1AL


On 08/15/2014 08:26 PM, Bill Conkling wrote:

> I was getting together items to take out for an event on Saturday and spent
> hours trying to sort out what was happening with my USB cables.  My K3 would
> not see the serial port.  As a last resort, I plugged the cable into the P3
> and everything worked!  Why does it work through the P3, but not direct?
>
>  
>
> .bill  nr4c  (confused)
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

All at 38,4. But nice try.  

Sent from my iPhone
...nr4c. bill

> On Aug 16, 2014, at 1:29 AM, Alan <[hidden email]> wrote:
>
> Perhaps the P3 and K3 are set to different baud rates?
>
> Alan N1AL
>
>
>> On 08/15/2014 08:26 PM, Bill Conkling wrote:
>> I was getting together items to take out for an event on Saturday and spent
>> hours trying to sort out what was happening with my USB cables.  My K3 would
>> not see the serial port.  As a last resort, I plugged the cable into the P3
>> and everything worked!  Why does it work through the P3, but not direct?
>>
>>  
>> .bill  nr4c  (confused)
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]