CP * (Speech Compression; GET/SET)
SET/RSP format: CPxxx; where xxx is 000-040 (speech compression level).
I know there is one for changing the meter display, but wasn't able to find it.
You can find ALL of the public K3 Commands Here
http://www.elecraft.com/manual/K3_Pgmrs_Reference_Rev_C14.pdf 73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
"If somebody has a bad heart,
they can plug this jack in at
night as they go to bed and it
will monitor their heart
throughout the night. And the
next morning, when they wake up
dead, there'll be a record."
--Mark S. Fowler, FCC Chairman,
1981 - 1987
On Mon, 19 Dec 2011 13:05:09 -0800, Rob <
[hidden email]> wrote:
>Hello group,
>Is there a way to access the Compression bar graph display data using
>RS-232 serial commands? I know to read the RF Power and ALC bar graph
>meters using the BG command but is it possible to query the meter level
>while transmitting? And on a related note, is there a way to determine
>which meter pair is currently being displayed as set by the DISP/METER
>switch?
>Thanks,
>--rob-- K6DQ
[snip]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Amateur Radio Operator N5GE
Locked
