This set up has been working without problems for several weeks. Then CAT
connection problems began. Audio is received and decoded, the K3/0 can
control the radio, however When WSJT is started, the familiar ³Rig Control
error² dialog box appears. In the Settings Menu under Radio, It does NOT
pass the CAT Test. I¹ve checked the ports and the port we are using is
assigned to the RRC unit.
Settings are
COM6, Baud rate: 38400; Data Bits: Eight; Stop Bits: one; Handshake: None;
PTT Method; CAT; Port; USB (this seems to be my only choice in the dip down
menu); Mode; USB; Split operation: Fake it. I played around with a number of
these also trying other ports.
Software Version 1.9.1;
Does anyone have suggestions.
73 Dave K1KA
Dave Mackey
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
