Setting the K2 real time clock

[Millerhill]

Well, I'm following the instructions but when I get to the part of actually changing the time or date by using the Band+ or Band- buttons, nothing happens. the current date is showing correctly and the time is 6 hrs behind UTC.

73,
Steve, W1SFR


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Steve,

Is that with the KAF2 or the KDSP2 installed.

If the KAF2, you *must* change the date first - if it is correct, move
it up and move it right back down.

That was intentional to keep the time from being accidentally changed in
situations like Field where there are operators with 'curious fingers'.

73,
Don W3FPR

On 10/7/2017 2:47 PM, Stephen Roberts wrote:
> Well, I'm following the instructions but when I get to the part of actually changing the time or date by using the Band+ or Band- buttons, nothing happens. the current date is showing correctly and the time is 6 hrs behind UTC.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]