Setting up K3 for FT8

[Vic Rosenthal]

I'm the process of setting up WSJT to run FT8 on my K3, using an
external sound card.

Set DATA A mode on the K3, turned of Windows sounds (which don't go
through my external sound card anyway).

The WSJT instructions say to press the Tune button -- in WSJT, not the
K3 -- and you should hear a tone in the radio's monitor function, which
should be a "completely pure tone." At this point you can adjust the
levels for the correct amount of drive.

I can easily adjust the sound card output and K3 Mic gain to give me the
desired four bars solid with the fifth flickering. The problem is that
when I do this, the tone I hear in the K3 monitor is warbling -- not
what I would call a "pure tone."

Is this what I should hear or is something maladjusted?

--
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]