Setting up RTTY on a K3 using a microham microkeyer2 and MMTTY?

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Setting up RTTY on a K3 using a microham microkeyer2 and MMTTY?

Dick Grolleman
Hi All

Anyone could help, can't get it to work again.
It worked ok made a few QSOs in RTTY, but started up again and no siganl from the K3. The radio keys on transmit, and MK2 says its sending data, but I do not get any signal out. It receives ok.

Any suggestions?

73 de Dick PA3FQA
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

RE: Setting up RTTY on a K3 using a microham microkeyer2 andMMTTY?

Joe Subich, W4TV-3

What did you change between operating sessions?  Did you change
the K3 digital mode from AFSK A to FSK D or vice versa?


> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Dick Grolleman
> Sent: Saturday, September 13, 2008 11:32 AM
> To: [hidden email]
> Subject: [Elecraft] Setting up RTTY on a K3 using a microham
> microkeyer2 andMMTTY?
>
>
> Hi All
>
> Anyone could help, can't get it to work again.
> It worked ok made a few QSOs in RTTY, but started up again
> and no siganl from the K3. The radio keys on transmit, and
> MK2 says its sending data, but I do not get any signal out.
> It receives ok.
>
> Any suggestions?
>
> 73 de Dick PA3FQA _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: Setting up RTTY on a K3 using a microham microkeyer2 andMMTTY?

Jim Cox
In reply to this post by Dick Grolleman
Are you in FSK D mode and not AFSK?   I assume your using FSK keying with
the MK.   Jim K4JAF


----- Original Message -----
From: "Dick Grolleman" <[hidden email]>
To: <[hidden email]>
Sent: Saturday, September 13, 2008 10:32 AM
Subject: [Elecraft] Setting up RTTY on a K3 using a microham microkeyer2
andMMTTY?


Hi All

Anyone could help, can't get it to work again.
It worked ok made a few QSOs in RTTY, but started up again and no siganl
from the K3. The radio keys on transmit, and MK2 says its sending data, but
I do not get any signal out. It receives ok.

Any suggestions?

73 de Dick PA3FQA
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com