Settings for CW decoder in K3

[Ignacy]

I am trying to use the CW decoder in K3 to help copy fast exchanges. It is
hit and miss. The CW decoder in KX3 is better and so is the external CW
Decoder by WD6CNF (spkr to MIC).
Ignacy, NO9E



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Nr4c]

First, press SPOT to “ zero-beat” the signal. Then adjust the threshold so that the CWT bar is flashing with the signal. This should work.

Sent from my iPhone
...nr4c. bill

> On May 25, 2019, at 11:03 PM, Ignacy <[hidden email]> wrote:
>
> I am trying to use the CW decoder in K3 to help copy fast exchanges. It is
> hit and miss. The CW decoder in KX3 is better and so is the external CW
> Decoder by WD6CNF (spkr to MIC).
> Ignacy, NO9E
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm]

A moderate bandwidth like 400 Hz will also help provide good decoding.

73,
Don W3FPR

On 5/26/2019 9:51 AM, Nr4c wrote:

> First, press SPOT to “ zero-beat” the signal. Then adjust the threshold so that the CWT bar is flashing with the signal. This should work.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On May 25, 2019, at 11:03 PM, Ignacy <[hidden email]> wrote:
>>
>> I am trying to use the CW decoder in K3 to help copy fast exchanges. It is
>> hit and miss. The CW decoder in KX3 is better and so is the external CW
>> Decoder by WD6CNF (spkr to MIC).
>> Ignacy, NO9E
>>
>>
>>
>> --
>> Sent from: http://elecraft.365791.n2.nabble.com/
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html