Elecraft

Shift waterfall with P3

classic Classic list List threaded Threaded
♦
♦
 4 messages Options
Gary Smith-2
Reply | Threaded
Open this post in threaded view
♦
♦
|

Shift waterfall with P3

Gary Smith-2
I've noticed something happening with the P3 that I haven't found a
way to resolve.

The K3 is hearing a station on 1.825.010 & Pushing spot verifies this
is the optimal frequency I'm hearing them at.
I have the P3 span sat the narrowest at 1.
The centerline of the P3 displays 1.824.97
Pressing CENTER on the the P3 says "Center Frequency 1.825.0"
However, the signal is decidedly to the left of the center line on
the P3 display.
The peak of the signal is above the signal, not at 1.825.0

It seems as if I could move the waterfall to the right 110 Hz, both
would be in sync.

I can't seem to find any mention  of an adjustment to get these in
sync. Any suggestions?

73,

Gary
KA1J


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Elecraft mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: Shift waterfall with P3

Elecraft mailing list
Have you looked at the Ref Cal option in the menu?




      From: Gary Smith <[hidden email]>
 To: [hidden email]
 Sent: Friday, January 30, 2015 12:07 AM
 Subject: [Elecraft] Shift waterfall with P3
   
I've noticed something happening with the P3 that I haven't found a
way to resolve.

The K3 is hearing a station on 1.825.010 & Pushing spot verifies this
is the optimal frequency I'm hearing them at.
I have the P3 span sat the narrowest at 1.
The centerline of the P3 displays 1.824.97
Pressing CENTER on the the P3 says "Center Frequency 1.825.0"
However, the signal is decidedly to the left of the center line on
the P3 display.
The peak of the signal is above the signal, not at 1.825.0

It seems as if I could move the waterfall to the right 110 Hz, both
would be in sync.

I can't seem to find any mention  of an adjustment to get these in
sync. Any suggestions?

73,

Gary
KA1J


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]


 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Gary Smith-2
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: Shift waterfall with P3

Gary Smith-2
Harry,

Apparently I hadn't. I had calibrated the K3 recently but missed that
in the P3 menu.

It is now properly calibrated and thank you for the pointer.

73,

Gary
KA1J
 

>
> Have you looked at the Ref Cal option in the menu?
>
>
>
>
>
>
> From: Gary Smith <[hidden email]>
> To: [hidden email]
> Sent: Friday, January 30, 2015 12:07 AM
> Subject: [Elecraft] Shift waterfall with P3
>
> I've noticed something happening with the P3 that I haven't found a
> way to resolve.
>
> The K3 is hearing a station on 1.825.010 & Pushing spot verifies this
> is the optimal frequency I'm hearing them at.
> I have the P3 span sat the narrowest at 1.
> The centerline of the P3 displays 1.824.97
> Pressing CENTER on the the P3 says "Center Frequency 1.825.0"
> However, the signal is decidedly to the left of the center line on
> the P3 display.
> The peak of the signal is above the signal, not at 1.825.0
>
> It seems as if I could move the waterfall to the right 110 Hz, both
> would be in sync.
>
> I can't seem to find any mention  of an adjustment to get these in
> sync. Any suggestions?
>
> 73,
>
> Gary
> KA1J
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>




---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Elecraft mailing list
Reply | Threaded
Open this post in threaded view
♦
♦
|

Re: Shift waterfall with P3

Elecraft mailing list
Glad I could help




      From: Gary Smith <[hidden email]>
 To: [hidden email]
 Sent: Friday, January 30, 2015 1:17 AM
 Subject: Re: [Elecraft] Shift waterfall with P3
   
Harry,

Apparently I hadn't. I had calibrated the K3 recently but missed that
in the P3 menu.

It is now properly calibrated and thank you for the pointer.

73,

Gary
KA1J
 

>
> Have you looked at the Ref Cal option in the menu?
>
>
>
>
>
>
> From: Gary Smith <[hidden email]>
> To: [hidden email]
> Sent: Friday, January 30, 2015 12:07 AM
> Subject: [Elecraft] Shift waterfall with P3
>
> I've noticed something happening with the P3 that I haven't found a
> way to resolve.
>
> The K3 is hearing a station on 1.825.010 & Pushing spot verifies this
> is the optimal frequency I'm hearing them at.
> I have the P3 span sat the narrowest at 1.
> The centerline of the P3 displays 1.824.97
> Pressing CENTER on the the P3 says "Center Frequency 1.825.0"
> However, the signal is decidedly to the left of the center line on
> the P3 display.
> The peak of the signal is above the signal, not at 1.825.0
>
> It seems as if I could move the waterfall to the right 110 Hz, both
> would be in sync.
>
> I can't seem to find any mention  of an adjustment to get these in
> sync. Any suggestions?
>
> 73,
>
> Gary
> KA1J
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]


>
>




---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Free forum by Nabble Edit this page