I've had this working before, but I think there have been some changes in the software releases that have change one thing.
It seems that I cannot get enough audio to the K3 to drive it to 100 watts. I have the K3 in AFSK mode when in Data mode. I am driving the rig from the back input connector.
I have to turn the line in up to 50 or more and then turn up the TX drive on the Signal Link to get around 80 watts output. I have about 4 to 5 bars on the ALC, but it seems not wanting to drive to 100 watts output.
Lee - K0WA
In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine?
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
