Yes, you're about right but . . .
Are you sure you are using the same CW sideband on both bands?
The K3 changes the offset depending on which filter you have chosen. Are
you using the same filter on 14 and 21 mhz?
Skimmer doesn't let you set the offsets by band. (That I am aware of).
This issue is a shortcoming in the LPan/Skimmer setup that I believe they
are working to correct.
Buck
k4ia
In a message dated 10/19/2010 2:44:12 P.M. Eastern Daylight Time,
[hidden email] writes:
I'm running LP PAN, the E-Mu 1212 soundcard and cw skimmer with my K3.
After much dicking around, I found that audio IF offset of +4405 Hz
puts the waterfall traces at the right places on the frequency scale on
14 MHz.
However, I'm in error by about 1.5 KHz on 21 MHz.
1] Does the 14 MHz offset sound about right?
2] Is there a way to define per-band offsets for Skimmer?
eric
VA7DZ
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html