Sn 7385 build started but wrong resistors supplied on control board.

[Paul Jackson]

Hi all started construction of my new K2 last weekend and was amazed at the quality of the build instructions and the PCB.
However on building the control board the resistor packs RP2 and RP4 82K Ohms were not in the kit but some 10 legged devices were supplied instead.
As it's Christmas and the post will be busy I was going to substitute some small size 82K resistors for the two resistor packs but I'm not sure how the resistor pack pin out is configured.
Could someone let me know the pin outs for the above resistors please.
Happy Christmas,
Paul Jackson    

[Don Wilhelm-4]

Paul,

The RPaks are configured as individual resistors.  The schematic can
show you which pins (they are adjacent pairs).

Actually I have not seen a slowdown on the delivery of parts by 1st
class mail or Priority Mail, so I suggest you contact [hidden email]
and request the proper parts - you should have them within a few days.

73,
Don W3FPR

On 12/15/2012 8:34 AM, Paul Jackson wrote:

> Hi all started construction of my new K2 last weekend and was amazed at the
> quality of the build instructions and the PCB.
> However on building the control board the resistor packs RP2 and RP4 82K
> Ohms were not in the kit but some 10 legged devices were supplied instead.
> As it's Christmas and the post will be busy I was going to substitute some
> small size 82K resistors for the two resistor packs but I'm not sure how the
> resistor pack pin out is configured.
> Could someone let me know the pin outs for the above resistors please.
> Happy Christmas,
> Paul Jackson
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Sn-7385-build-started-but-wrong-resistors-supplied-on-control-board-tp7567211.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Christophe F8ACF-56]

paul goodnight, goodnight all

I have the same problem as you on the SN 7369 team Elecraft me very well serviced by giving me good resistance, the after-sales service is very responsive!

So I advise you to make them an email

 
73 , Christophe F8ACF-56


________________________________
 De : Paul Jackson <[hidden email]>
À : [hidden email]
Envoyé le : Samedi 15 décembre 2012 14h34
Objet : [Elecraft] Sn 7385 build started but wrong resistors supplied on control board.
 
Hi all started construction of my new K2 last weekend and was amazed at the
quality of the build instructions and the PCB.
However on building the control board the resistor packs RP2 and RP4 82K
Ohms were not in the kit but some 10 legged devices were supplied instead.
As it's Christmas and the post will be busy I was going to substitute some
small size 82K resistors for the two resistor packs but I'm not sure how the
resistor pack pin out is configured.
Could someone let me know the pin outs for the above resistors please.
Happy Christmas,
Paul Jackson   



--
View this message in context: http://elecraft.365791.n2.nabble.com/Sn-7385-build-started-but-wrong-resistors-supplied-on-control-board-tp7567211.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Paul Jackson]

Thanks for the reply Don.
After searching for hours I finally found the pin outs and fitted eighth watt resistors instead.
Did the first lot of digital tests yesterday and all passed with flying colors, very impressed.
Love the look of the rig now the front panel and sides have been fitted, shame I have to pull it all to bits again for the next build stages.
Not complaining about the US mail service, It's the British postal service that have said parcels from the
USA will not now arrive until after Christmas if ordered after the 12th of December. Yes it's a joke.
Regards.
Paul