Solar Controller

[Don Brown-4]

Hi

I have been supplying a Solar Charge Controller Kit for several years. This
controller will keep a SLA or LA 12 volt battery charged from solar panels
of 3 to about 150 watts. Batteries of 2 amp hour to 110 amp hour have been
used
with these controllers. I have a new batch of circuit boards that have just
arrived. The kit is $30 check or money order and includes all the parts and
documentation required to build the controller, less a box to mount it into.
Below is a FAQ about the controller.

I also still have a small quantity of the low power controller. This
controller will handle up to 1.5 amps or about 20 watts. This version will
power a KX1, K1 or QRP K2. The price for this version is $16

order from:

Don Brown
KD5NDB
19132 Falls Creek Drive
Flint, Texas 75762

The price includes US postage

Thanks

Don




Solar Controller FAQ:

What is it and what does it do?

This is a small 2x3 circuit board that allows you to connect a solar panel
to a 12 volt sealed lead acid or lead acid battery to keep it charged. The
kit comes with instructions, application notes and all parts required to
build the controller. The included circuit board is FR4 fiberglass with silk
screen and solder mask. The kit does not include a box as most people build
it into their battery box.

How much power can it handle?

The controller uses a 45 amp power fet to switch the solar panel on and off.
The current that the controller can handle is limited by the shottkey
blocking diodes. I use two of them in parallel rated at 8 amps each so 12-15
amps is the maximum safe charging current. This equates to about a 150 to
200 watt
panel

What size battery will work with the controller?

You can use almost any size battery with the controller although for best
results the battery should be sized to the solar panel you are going to use.
A rule of thumb is about 2 watts per amp hour has worked well for me
although "your mileage may vary". For the K2's 2.9 amp hour internal battery
a 5-10 watt panel would keep you on the air. For a K2/100 running 70-100
watts a 90-110 amp hour battery and 80-150 watts of solar panels would work.
I
have used 2 35 watt panels and a 80 watt panel in parallel for 150 watts
into a 110 amp hour sla battery.

Can I charge the K2 internal battery with the solar panel and controller?

Yes the internal battery can be charged as long as the charge controller is
connected directly to the battery through a properly sized fuse. You cannot
connect the controller to the normal K2 power connector. You will need to
supply a connector on the K2 to connect the charge controller or build the
controller into the K2 lid and install a connector for the solar panel.

Will it work with other types of batteries like NiCad's or NiMH?

No it is designed to work only with 12 volt Lead Acid or Sealed Lead Acid
(gel cell) batteries

Is there a 6 volt version?

Yes the instructions explain how to change the controller to 6 volts. I will
supply the parts on request for 6 volts.

How does it compare with the MicroM+?

My controller functions exactly the same as the MicroM+ although I use a
different IC and different circuit design. My controller is much simpler and
includes a circuit to turn off the charge indicator LED when the solar panel
is not outputting enough voltage to charge the battery. My controller will
handle more current than the MicroM+ and because of the precision voltage
reference in the IC it does not have or require any adjustments.

Does the controller generate any RF noise?

No this a purely analog switch circuit. It does not have any switching power
supplies that generate RF noise

How much does it cost?

$30 check or money order. Sorry no credit cards or paypal


Thanks

Don Brown
KD5NDB

19132 Falls Creek Drive
Flint, Texas 75762
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com