|
Harbor Freight ('Arbor Fright for our VK readers...HI!) has a 3 panel
setup which comes with a controller and 2, 12 volt compact flourescent lamps. Claimed power is 45 watts. Usual price is $249. Got mine at the local Harbor Freight store on sale for $199 and was able to use a 15% off cupon to reduce the cost to about $180 after Pennsyslvania and county confiscatory sales taxes. The stand for the panels is a fixed angle steel device sure to rust quickly. I made one of aluminum angle stock with variable angle. Measured peak power output in mid-summer for my installation is 3 amps (about 39 watts.) The panels appear to have reverse current protection diodes. I regard it as a good value for @ $180. Were I to do a whole house system, I'd go with Kyrocera and spend the extra dollars. 72, Tim Colbert K3HX _____________________________________________________________ Click now to save up to 80% off of cork flooring. http://thirdpartyoffers.juno.com/TGL2111/fc/Ioyw6iifg5UDlSIvNh7omeGgsl28OWebJ3vNmoiQfQVWGSM6pebz3M/ _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
I have seen that setup in the HF store and wondered if you get 3 12 V
panels that you wire in parallel or 3 4V panels that you wire in series. Lots of extra options if they are 3 12V panels. No clue on the box, IIRC. Are they 12V or 4V? Jerry W4UK At 06:25 AM 3/19/2008, [hidden email] wrote: >Harbor Freight ('Arbor Fright for our VK readers...HI!) has a 3 panel > >setup which comes with a controller and 2, 12 volt compact flourescent > >lamps. Claimed power is 45 watts. Usual price is $249. > > >Got mine at the local Harbor Freight store on sale for $199 and was > >able to use a 15% off cupon to reduce the cost to about $180 after > >Pennsyslvania and county confiscatory sales taxes. > > >The stand for the panels is a fixed angle steel device sure to rust > >quickly. I made one of aluminum angle stock with variable angle. > > >Measured peak power output in mid-summer for my installation is 3 amps > >(about 39 watts.) The panels appear to have reverse current protection > >diodes. > > >I regard it as a good value for @ $180. Were I to do a whole house > >system, I'd go with Kyrocera and spend the extra dollars. > >72, > >Tim Colbert K3HX >__________________________________ _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
| Free forum by Nabble | Edit this page |
