Soldering Station Recommendation

[Edward A. Dauer]

On the advice of Jim, K9YC, I bought a Hakko to build a K2 recently, along
with a couple of tips of different sizes as Don, W3FPR, suggests.  Worked
great.  I haven¹t built a K1, but based on my experience with a K2 I would
strongly recommend you buy a ³solder sucker² as well.  Very inexpensive,
works amazingly well, and saves a great deal of embarassment.

Ted, KN1CBR


-----Original Message-----
From: Mark Petrovic
Sent: Saturday, January 23, 2016 10:11 PM
To: [hidden email]
Subject: [Elecraft] Soldering station recommendation in preparation
forbuilding a K1

Hi.  I am preparing to build the Elecraft K1, and am seeking a
recommendation for a temperature controlled soldering station
mentioned in the K1 assembly guide.

Any suggestions?

Thank you.

--
Mark
______________________________________________________________

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]