Speaker question

[NZ0T]

I have used two speakers with my K3 for several years.  Lately I have noticed that when the headphones are plugged in the left speaker stays on even though I have speakers set to off in the menu.  This has not happened before.  I use a 1/8 stereo plug in the rear speaker jack.  Everything works normally except for the left speaker staying on when it shouldn't.  I have 2 speakers set in the menu and am using firmware 5.38.

Ideas?

73 Bill NZ0T

[Don Wilhelm-4]

Bill,

My guess is that you have a problem with the headphone jack.  My guess
is that the contacts that say "headphones have been plugged" is working
for the right channel, but the same contact for the left channel is failing.

As I said, that is just a guess on my part - the folks at K3support may
have some other ideas, I suggest contacting them.

73,
Don W3FPR

On 1/20/2016 10:48 AM, NZ0T wrote:
> I have used two speakers with my K3 for several years.  Lately I have noticed
> that when the headphones are plugged in the left speaker stays on even
> though I have speakers set to off in the menu.  This has not happened
> before.  I use a 1/8 stereo plug in the rear speaker jack.  Everything works
> normally except for the left speaker staying on when it shouldn't.  I have 2
> speakers set in the menu and am using firmware 5.38.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]