30 years ago, when I was living in Fairfax County, VA, the TV cable was
shipped around on a double coax cable. It resembled lamp cord or zip cord, and was two parallel coax lines with a webbing between them. I am in need of the proper name for that cable, so I can search some out. I used it as feed for a full size lazy 80 meter loop - about the same as tuned feeders would be used. It worked very well on all bands - providing lots of DX and a ton of local coverage also. Not a tri-bander - but it beat the socks off other wires and verticals. I want to duplicate that antenna this spring. Thanks, Bill W2BLC K-Line ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Search for: Belden 9077 Dual RG6 Coax
Joe ( www.aj8mh.com ) On 1/16/2018 2:55 PM, Bill wrote: > 30 years ago, when I was living in Fairfax County, VA, the TV cable > was shipped around on a double coax cable. It resembled lamp cord or > zip cord, and was two parallel coax lines with a webbing between them. > I am in need of the proper name for that cable, so I can search some out. > > I used it as feed for a full size lazy 80 meter loop - about the same > as tuned feeders would be used. It worked very well on all bands - > providing lots of DX and a ton of local coverage also. Not a > tri-bander - but it beat the socks off other wires and verticals. I > want to duplicate that antenna this spring. > > Thanks, > > Bill W2BLC K-Line > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Bill Clarke
Are you thinking of RG-6/U Twin Parallel Cable?
73, Dennis NJ6G On 1/16/2018 11:55, Bill wrote: > 30 years ago, when I was living in Fairfax County, VA, the TV cable > was shipped around on a double coax cable. It resembled lamp cord or > zip cord, and was two parallel coax lines with a webbing between them. > I am in need of the proper name for that cable, so I can search some out. > > I used it as feed for a full size lazy 80 meter loop - about the same > as tuned feeders would be used. It worked very well on all bands - > providing lots of DX and a ton of local coverage also. Not a > tri-bander - but it beat the socks off other wires and verticals. I > want to duplicate that antenna this spring. > > Thanks, > > Bill W2BLC K-Line ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
....like Belden 9077?
https://catalog.belden.com/techdata/EN/9077_techdata.pdf We used it when I worked for Palmer Cablevision in Naples, FL in the early 80's 13 channels on one, 13 on another with a switch on top of your TV... Russ KD4JO -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Dennis Moore Sent: Tuesday, January 16, 2018 3:06 PM To: [hidden email] Subject: Re: [Elecraft] Special type of coax - need info Are you thinking of RG-6/U Twin Parallel Cable? 73, Dennis NJ6G On 1/16/2018 11:55, Bill wrote: > 30 years ago, when I was living in Fairfax County, VA, the TV cable > was shipped around on a double coax cable. It resembled lamp cord or > zip cord, and was two parallel coax lines with a webbing between them. > I am in need of the proper name for that cable, so I can search some out. > > I used it as feed for a full size lazy 80 meter loop - about the same > as tuned feeders would be used. It worked very well on all bands - > providing lots of DX and a ton of local coverage also. Not a > tri-bander - but it beat the socks off other wires and verticals. I > want to duplicate that antenna this spring. > > Thanks, > > Bill W2BLC K-Line ______________________________________________________________ Elecraft mailing list Home: https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=02%7C01%7C%7C8d599e895a0142f28ea908d55d1ce168%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636517300966816071&sdata=41YVMnptN7HRuK3ENT1SaxHBL%2FukhGCl141196%2BGAJs%3D&reserved=0 Help: https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htm&data=02%7C01%7C%7C8d599e895a0142f28ea908d55d1ce168%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636517300966816071&sdata=RQJVazN7N4H1SVCIEvG%2FjUFY2lEUiWgJRLjAL%2Bql8kg%3D&reserved=0 Post: mailto:[hidden email] This list hosted by: https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net&data=02%7C01%7C%7C8d599e895a0142f28ea908d55d1ce168%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636517300966816071&sdata=GQQ%2BJzzUiCdbwkOs%2BCQ8nVTaGJYVo%2F%2FCDfXwNnjD2N4%3D&reserved=0 Please help support this email list: https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.html&data=02%7C01%7C%7C8d599e895a0142f28ea908d55d1ce168%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636517300966816071&sdata=Bo0DjgT5Bqrojj6odoP5CFn69jD2GsevB9dYReKkjsU%3D&reserved=0 Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Bill Clarke
I've seen the name "TwinAx" somewhere. It was probably networking or
terminals, at least 30 years ago. 73 -- Lynn On 1/16/2018 11:55 AM, Bill wrote: > 30 years ago, when I was living in Fairfax County, VA, the TV cable was > shipped around on a double coax cable. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Bill Clarke
Twinax under that name was a two conductor shielded coax like cable for balanced antennas. The R-389 for instance had a connector for that kind of cable.
<https://www.prowireandcable.com/ib/belden-9207/9207/?gclid=EAIaIQobChMIl_Hb1q3d2AIVhj1pCh0MkAd5EAAYASAAEgJSKfD_BwE> But are you sure you are not thnking about the cable for Token-Ring networks? That was two pair for IBM networks of about 25 years ago. Stiff and ugly to work with. David K0LUM > On Jan 16, 2018, at 2:26 PM, Lynn W. Taylor, WB6UUT <[hidden email]> wrote: > > I've seen the name "TwinAx" somewhere. It was probably networking or terminals, at least 30 years ago. > > 73 -- Lynn > > On 1/16/2018 11:55 AM, Bill wrote: >> 30 years ago, when I was living in Fairfax County, VA, the TV cable was shipped around on a double coax cable. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
On 1/16/2018 12:53 PM, David Christ wrote:
> Twinax under that name was a two conductor shielded coax like cable for balanced antennas. The R-389 for instance had a connector for that kind of cable. I am NOT looking for TwinAX nor two coaxes wither their jackets bonded. RG400 is what I'm looking for, and thanks to those who correctly read my mind. :) 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
That is a coax with a double shield except the shields are each insulated.
Bob, K4TAX Sent from my iPhone > On Jan 16, 2018, at 3:09 PM, Jim Brown <[hidden email]> wrote: > >> On 1/16/2018 12:53 PM, David Christ wrote: >> Twinax under that name was a two conductor shielded coax like cable for balanced antennas. The R-389 for instance had a connector for that kind of cable. > > I am NOT looking for TwinAX nor two coaxes wither their jackets bonded. RG400 is what I'm looking for, and thanks to those who correctly read my mind. :) > > 73, Jim K9YC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Bill Clarke
Dual or Siamese coax
73-Gary K9GSĀ -------- Original message --------From: Bill <[hidden email]> Date: 1/16/18 1:55 PM (GMT-06:00) To: [hidden email] Subject: [Elecraft] Special type of coax - need info 30 years ago, when I was living in Fairfax County, VA, the TV cable was shipped around on a double coax cable. It resembled lamp cord or zip cord, and was two parallel coax lines with a webbing between them. I am in need of the proper name for that cable, so I can search some out. I used it as feed for a full size lazy 80 meter loop - about the same as tuned feeders would be used. It worked very well on all bands - providing lots of DX and a ton of local coverage also. Not a tri-bander - but it beat the socks off other wires and verticals. I want to duplicate that antenna this spring. Thanks, Bill W2BLC K-Line ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Bill Clarke
Thanks to all that replied. I was reminded that the shielding is
aluminum etc. I had forgotten that little detail over the years. I do now recall that the cable I used did have copper - it was used exclusively at the head-ends and was hard to get. Hence, I think I will parallel some RG8X, use cable ties and Goop, and make my own. That way I can make solid soldered connections for everything. Gotta do things right the first time and have it last many years with no further service. Thanks for the reminder. Bill W2BLC K-Line ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Free forum by Nabble | Edit this page |