Split Macro not changing modes

[Peter Chamalian]

Here's an odd thing with the split macro.  If I'm on cw and have gotten
there via N1MM logger, I press the button assigned to the macro and it works
and I'm on cw with both vfos.

 

Now I go to a ssb spot, click on the spot.  VFO A is in ssb mode.  I press
them same macro button but vfo B does not go to ssb.  I have to press the
a->b button twice fast to make that happen.  Then, both vfos are on ssb.

 

If I then go back to cw, press the macro button again and both vfos are on
cw.

 

The Split macro:

SWT13;SWT13;FT1;UPB4;RT0;XT0;SB1;BW$0080

 

Why is this macro behaving like this?  Is it because of the bandwidth
command or something else?

 

Thanks,

 

Pete, W1RM

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html